TELL Software Ungarn

The Gate Control BASE device was basically designed for control of electric gates and barriers. However, it can be used to control other devices as well. Controlling can be performed according to the configured control mode by making a phone call to the number of the SIM card installed into the device. For compatibility with most gate automation control boards, upon setup you can choose out of 5 different control modes, the one which is appropriate for your gate automation. When controlling the system by call, it uses caller identification to identify the caller/user. Since in order to identify the caller and perform the control it is sufficient to identify the caller ID, the system rejects the call, thereby the call will be free of charge. However, it is possible that the mobile service provider applies a call set-up fee on rejected calls (this is operator-dependent, please ask your mobile service provider). When calling from an authorized phone number, the device rejects the call and activates the appropriate output(s), and stores the event in the event logs.
Controlling (opening/closing) is possible only from authorized phone numbers registered in the device, or from any phone number, according to the configuration: if there are users registered with phone numbers in the user list, only calls from these phone numbers can control the device. If there are no users registered, calls from any phone number will control the device (in this case the device can only be configured through USB).
The system supports up to 1000 users, for which different options and permissions can be configured, such as role, 0-24 entry period, and access to outputs (gates), depending on the output control mode chosen.

Main features:

• 4G/3G/2G communication
• Control of relays with free phone call
• Sending SMS upon state change of the 4 contact inputs
• Programmable through USB, SMS or via Internet
• Large event memory

Characteristics of Gate Control BASE:

• Control (open / close) of automated gates and barriers with free GSM call using caller identification
• Notification about malfunctions of the gate by SMS:
  • blocking of the photocell
  • forced opening of the barrier housing
  • barrier arm or gate jam
• Control (open / close) can be performed only from authorized phone numbers configured in the device, or unlimited from any phone number without limitations, depending on the settings
• Selectable control mode, depending on the type of the gate

Advantages in comparison with radio control:

• Control from cellular phone without any additional unit
• No radio interference, no accidentally opened gate
• Possibility of registering up to 1000 users with permission granting (e.g. entry prohibition out of labor hours)
• Stores last 1200 events with identification of users and opening time
• Event log can be downloaded remotely (via Internet), printed or stored electronically
• Sends notification in SMS and logs if the gate remains open or the photocell is blocked
• There is no distance limit for control

Application area:

Electric gates, garage doors, barriers, bollards, parking lots, parking garages, multi-storey car parks, residential parks, other controls

https://tell.hu/en/products/gsm-automation/gate-control-base-1000-4g

The Gate Control PRO device was basically designed for control of electric gates, barriers and bollards, however it can be used to control other devices as well. Controlling can be performed according to the configured control mode by making a phone call to the SIM card installed into the device and/or over the internet, using the mobile application. For compatibility with most gate automation control boards, upon setup you can choose out of 5 different control modes, the one which is appropriate for your gate automation.

Depending on the variant, the system supports up to 20 or 1000 users to which different permissions and access periods, as well as custom access rules can be assigned. The access periods can be configured by access templates which can be assigned to users. The system will accept control commands from the given user within the access period and will reject them when out of the period.

Gate Control PRO is available in 2G, 3G, 4G and wi-fi versions. Gate Control PRO supports IP cameras, limit switch and doorbell, which can be checked directly in the mobile app. Gate Control PRO has several extra functions, which differentiates it from other simple gate opener devices. These are for instance the emergency opening function, the configurable user permissions, the licence plate recognition and the timed control modes.

Main features:

• 4G/3G/2G communication
• Control of electric gates and barriers via mobile phone, smartphone application or via GSM call
• Option for controlling two different gates or barriers with the same device
• 20/1000-user variants
• Notification sending if the gate or barrier fails to open or close
• Showing the open/closed status of the gates or barriers in the smartphone application
• Status reporting of 4 contact inputs via e-mail, SMS or call
• Transmits doorbell activity to mobile phone
• ONVIF camera support, makes camera pictures available in the smartphone application
• Configurable user permissions and entry periods
• Configurable automatic timed controls
• Event log and report sending in e-mail

Application area:

Electric gates, garage doors, barriers, bollards, parking lots, parking garages, multi-storey car parks, residential parks, other controls

https://tell.hu/en/products/gsm-automation/gate-control-pro-1000-4g