SORHEA

High performance infrared barrier

•  MODULARITY : Two different housings to adapt to the different site configurations
•  INNOVATION : ZONING function, TCP/IP network
•  RELIABILITY : Beams multiplexed through wired synchronisation

Principle

The MAXIRIS infrared barriers offer the highest level of performance of SORHEA products. In fact, for long perimeters (above 1 km), the MAXIRIS columns can be directly connected to a TCP/IP network or in RS485 bus via the MAXIBUS UNIVERSAL Hub.

https://www.sorhea.com/wp-content/uploads/2021/04/04.-MAXIRIS.pdf

Thanks to the ZONING function, up to three virtual detection zones can be created (configurable length) per barrier, optimising the video system (alarm information per zone) and, thus, reinforcing site reliability while guaranteeing a very high security level.

A multi-lingual HTML server, integrated into each column, can be used to carry out all the system configuration and maintenance operations.

New Generation of high performance Autonomous Infrared barrier

• EASY INSTALLATION : Autonomous barrier, no civil engineering or cabling
•  RELIABILITY : Communication through secure and trusted radio protocol. High power of detection
•  INNOVATION : 1st autonomous, long-range (100m) infrared barrier on the market
•  New features : Train filtering functionnality, polyacetal housing option and configuration software

Principle

The SOLARIS NG independent columns form a real immaterial wall of detection. Powered by a solar panel and an integrated battery, no civil engineering is necessary during the installation. A radio mesh is then created by all the SOLARIS NG columns to transmit alarm information reliably and efficiently.
Each SOLARIS NG column integrates a very powerful radio transmitter/receiver with low power consumption.

When the infrared barrier detects an intrusion, the alarm information is received by all the nearby infrared columns which in turn retransmit it automatically. The alarm message is thus relayed up to a radio reception coordinator connected to the MAXIBUS UNIVERSAL hub. The alarm centre is then alerted to the intrusion.

Fully autonomous solution, no civil engineering

The infrared SOLARIS NG column is fully autonomous. Powered by a solar panel and an integrated battery, no civil engineering operation or wiring is necessary during installation.

The battery guarantees an excellent system autonomy (more than 1 month) and operating temperatures of – 40°C to +70°C. Each SOLARIS NG column is equipped with a radio transmitter / receiver from SORHEA. Thanks to a proprietary protocol, all the infrared columns form a secure mesh network.

https://www.sorhea.com/wp-content/uploads/2022/09/SOLARIS-NG_EN-1.pdf

This technology enables alarm information to take several paths simultaneously to reach the radio coordinator and thus ensure a high level of security. To reinforce the security of the information, a “watchdog” function surveys the correct functioning of the network.

Shock detection system for fences

• EASY INSTALLATION: Little civil engineering required
• EASY TO USE: Remote configuration, maintenance and updating
•  SUITABLE FOR ALL YOUR PAGES: Integration with VMS via API or MAXIBUS

Principle

G-FENCE 2400 is a shock detection system for outdoor fences that offers multiple simultaneous alarm detection modes. Alarm information is reported back either from dry contacts or from the RJ485 output to our MAXIBUS Universal or from the Modbus / API output. The Modbus / API output allows you to return information on your IP network for direct integration with VMS.

During an intrusion, the vibrations (climbing, cutting or tearing) caused on the fence are sensed by the accelerometers attached to the fence and transmitted to the MU, which analyzes the information and generates an alarm when the trigger threshold is reached.

https://www.sorhea.com/wp-content/uploads/2022/09/G-FENCE-2400.pdf

Shock detection system for fences

•  EASY INSTALLATION : Standalone solution, little civil engineering
•  RELIABILITY : Distributed intelligence, event filtering
•  EFFICIENCY : Precise location, zoning

Principle

G-FENCE is a shock detection system for perimeter fences. G-FENCE detects fence vibrations generated by intrusion attempts by cutting, climbing or pulling out the fence. The system then transmits alarm information via the MAXIBUS UNIVERSAL Hub.

To limit civil engineering, G-FENCE works autonomously thanks to power supply from solar panels and a batteries that are integrated into each control unit. Unique on the market, the G-FENCE innovation can be used to secure a 3200 m x 4 perimeter while guaranteeing a 1 second alarm response time and a precise intrusion location to within 3 m.

Detection adjustment is very simple. A mapping software application is used to locate zoning by superimposing it over a site plan or picture. Maintenance is facilitated as the product is easy to connect.

https://www.sorhea.com/wp-content/uploads/2021/07/G-FENCE-3000.pdf

Dual Technology Detector

• Radar function for precise detection zone length setting
• Centralization of the alarms with the MAXIBUS UNIVERSAL via the deported module 8 inputs (MI8)
• Bluetooth configuration on Smartphone

Principle

The new PIRAMID detectors are a high performance intrusion volumetric detection system at the cutting edge of current technology. The reliability of the product by the combination of two technologies is provided by a passive infrared sensor (PIR) and a Doppler microwave antenna. The alarm will only be triggered if the two technologies simultaneously detect an intrusion.

PIRAMID detectors are very easy to set up. Via a secure application on smartphone or tablet, if the detector is difficult to access, the setting can be done locally, wirelessly.
The embedded CONNECT technology makes it possible to put several PIRAMID detectors in radio or wired network to centralize the alarm information on the MAXIBUS UNIVERSAL.

It is also possible to retrieve the alarm information thanks to the on-board dry contact outputs.

https://www.sorhea.com/wp-content/uploads/2021/07/PIRAMID.pdf